The TrackVIEW is a presenter control system that incorporates both motion based camera tracking and camera preset tracking into one system.

The Vaddio TrackVIEW Camera Control System was designed to provide system integrators with an easy-to-operate, fully featured and ultra flexible, multiple-mode camera tracking system.

Motion Tracking and/or Preset Tracking: The system uses motion tracking technology with Vaddio’s preset camera control technology. This combination of technologies, when “ON”, allows the presenter to stay on camera as they walk between preset camera shots. Motion tracking can be disabled providing for only triggered preset tracking and preset tracking can be disabled allowing for only motion tracking.
Two Camera System: The TrackVIEW was designed to use two (2) Sony PTZ Cameras. The Sony EVI-D70 is used for the reference camera and the tracking camera can be either the Sony EVI-D70, EVI-D100 or the BRC-300. Both cameras are equipped with the Vaddio EZCamera™ Cabling System for Cat. 5 connectivity.
First-Step, Last-Step and Multi-Step Modes: When using the TrackVIEW in “PRESET TRACKING” mode, the unit can be setup to respond to the first trigger using the Vaddio AutoVIEW™ IR or Vaddio StepVIEW™, the last trigger, or a combination of triggers.


Technical Specifications:
- Cameras Compatible (reference): Vaddio and Sony. - Sony EVI-D70 with Vaddio EZCamera Cabling Shoe.
- Cameras Compatible (tracking): Vaddio and Sony. - Sony EVI-D100, EVI-D70, BRC-300 all with Vaddio EZCamera Cabling Shoe.
- Video Inputs: Two (2), reference and tracking camera inputs.
- Video Outputs: Two (2) composite (BNC) and two (2) Y/C (4-pin mini) for both reference and tracking.
- Control Interface: One (1) RS-232 on DB9 for control system and one (1) RS-232 auxiliary control out for use with Vaddio’s ControlVIEW™ Xtreme.
- Camera Presets: (discrete) Five (5), any combination of up to five (5) Vaddio AutoVIEW IR Sensors or Vaddio StepVIEW Mats, auto-sensing.
- Camera Control Port: USB.

Product of Vaddio